Knauf joint mortar

1 product

Knauf joint mortar is a high-performance cement compound designed to seal joints between structural boards outdoors and in damp areas. If you work in the industry, you know that lightweight façades are only watertight if the joints are treated properly. Our catalogue is updated by the second so you can quickly filter by price, such as the €57.28 price of the Aquapanel model, or check stock. At Brikum, we help you complete your renovations with professional finishes and maximum durability from minute one.

Technical guide to choosing the ideal Knauf joint mortar

Choosing the right chemical mix is the most critical step when you are going to buy bonding material from our online shop. Treating joints in cement board systems requires very specific compounds. We have summarised the 3 key points you need to consider to choose your Knauf joint mortar without room for error.

  1. Application environment. Consider whether the work is indoors in very damp areas, such as changing rooms, or outdoors, as this will determine the level of water repellency you need.
  2. Mechanical performance. The product's shrinkage capacity must be minimal so it can absorb building movements and prevent the Knauf joint mortar from eventually cracking.
  3. Working time. Fast-setting mixes require skilled hands for quick repairs, while standard formulas give you time to make corrections on large wall areas.

Comparison of mortar compounds and mixes

Mix type Main use Recommended environment Approximate coverage
Aquapanel grey mortar Sealing cement boards Façades and extreme damp 0,7 kg/m²
Gypsum-based bonding paste Direct fixing of boards Dry interiors 3 to 5 kg/m²
Fast-setting mortar Patches and urgent repairs Interiors Variable

Installers who regularly buy from Brikum are clear about it. Using original Knauf joint mortar saves you the headache of hairline cracks in the medium term. It is very easy to work with, has no wastage and its price is more than justified by saving you costly remedial work.

How to apply Knauf joint mortar in 4 steps

  1. Preparation. Pour the powder into clean water following the proportions on the bag and mix with the mixer at low speed until there are no lumps.
  2. Initial filling. Apply 1 coat of Knauf joint mortar with the steel trowel and press firmly to fill the entire gap between the boards.
  3. Reinforcement. Place the fibreglass mesh tape over the still-fresh Knauf joint mortar and centre it properly on the joint.
  4. Covering. Immediately cover the mesh with 1 second, very thin coat and respect the drying time before applying the final finish.

Everything you see in our shop complies with CE marking and the watertightness regulations of the Spanish Building Code. Take a look at the technical diagrams for each product page if you have any questions about installation. At Brikum, we guarantee the best offers, direct deliveries to the worksite in 2 to 5 days and top-brand materials so you can work with peace of mind.

Show more

Frequently Asked Questions about Knauf joint mortar

What exactly is Knauf Aquapanel gray joint mortar used for?

Used to fill and seal the joints between cement boards installed outdoors or in areas with very high humidity. This compound creates a flexible, waterproof barrier that withstands structural expansion and contraction, preventing water from entering the partition wall or facade.

How much coverage does a 20 kg bag of Knauf joint mortar provide on-site?

The average coverage is around 0.7 kg per 1 m² of installed board. One 20 kg bag provides enough material to fill the joints on approximately 28 m² of surface, although actual consumption always varies slightly depending on the thickness of the gap between the boards.

Can I use this Knauf joint compound for standard plasterboard?

No, it isn’t the right product. This Knauf joint mortar is cement-based to withstand water and alkalinity in exterior boards. For standard drywall, you should use gypsum-based compounds, which we also have available in our catalog.

How long does the mixture need to dry before the wall can be coated?

Allow at least 24 hours of curing for every 1 mm of thickness applied, always depending on the temperature and ventilation at the worksite. You must adhere strictly to this time so that the moisture evaporates completely before applying the render.

What advantages does buying mortar and construction materials from Brikum offer me?

Best of all, we deliver the heavy bags directly to your job site in 2 to 5 days. You save yourself trips and unnecessary heavy lifting. Plus, you can buy professional-grade brands at a great price, and our technical team is on hand to help if you get stuck with your renovation.