Descripción
PU010 adhesive is ideal for quick installation of insulation and acoustic panels, SATE and roof insulation. Suitable for use on many different substrates including masonry, concrete, wood and metal.
CHARACTERISTICS
- An easy-to-use alternative to dry wall mortars and adhesives
- Ideal for joining drywall, insulation and SATE
- Forms a high-strength bond after just 40 minutes
- Expands to fill gaps, cavities and uneven surfaces
- Compatible with a wide range of construction supports
- Charging time after approximately 3 hours
- Fast curing, skin formation in 10 minutes
- No subsequent expansion or contraction
SPECIFICATIONS
Characteristics |
Rule |
Classification |
Reaction to fire |
DIN 4102-1 |
B2/B1 |
Foam type |
N.B.S. |
|
Quality |
EIFS |
|
Component system |
Single component |
|
Propellants |
Yeah |
|
Aerosol limit temperature |
10ºC – 30ºC |
|
Ideal aerosol temperature |
20ºC |
|
Ambient limit temperature |
5ºC – 35ºC* |
|
Density |
LAB 015 |
15 - 25 |
Skin formation (min) |
FEICA TM 1014 |
10 |
Time to cut (min) |
FEICA TM 1005 |
35 |
Load capacity (hour) |
3 |
|
Performance |
FEICA TM 1003 |
30l |
Thermal conductivity (mW/mK) |
EN 12667 |
36 |
Elongation at break (%) / dry |
FEICA TM 1018 |
14 |
Compression strength @ 10% (kPa) / dry |
FEICA TM 1011 |
44 |
Compression strength @ 10% (kPa) / wet |
32 |
|
Shear strength (kPa) / dry |
FEICA TM 1012 |
51 |
Temperature resistance (long term) (°C) |
-40 ºC – 90 ºC |
|
Temperature resistance (short term) (°C) |
-40 ºC – 130 ºC |
|
VOC (%) |
17.49 |
|
VOC (g/l) |
180.00 |
|
Conservation |
24 months |
APPLICATION TIPS
- Shake the bottle vigorously at least 20 times.
- Remove the protective cap from the canister and place the upper end into the illbruck PU foam gun adapter.
- Spray a bead of illbruck PU010 adhesive foam around the perimeter and center back of the insulation material.
- Always handle the canister upright for best results and make sure the valve is facing downward.
- Move the panel into place and press firmly to ensure good contact. Hold it in position for 2-3 minutes. Heavy panels may require additional support during curing.